Check

 

Defiance Boats!

LURECHARGE!

THE PP OUTDOOR FORUMS

Kast Gear!

Power Pro Shimano Reels G Loomis Rods

  Willie boats! Puffballs!

 

Three Rivers Marine

 

 
Topic Options
Rate This Topic
#1007000 - 04/12/19 04:52 PM The Polymer 80 Glock Frame
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 8060
Loc: Vancouver, WA
Here's my G19-size P80...




Non-OEM parts :
Polymer 80 frame
Brownells slide
KKM barrel
Overwatch TAC trigger
Wolff RP safety plunger spring
LWD safety plunger
LWD channel liner
Wolff 4lb striker spring
DelTac trapezoid slide lock lever
Steel City magwell....made for the P80 G19....not adapted


Noteworthy parts :
Standard length OEM mag catch (extended not needed on this frame)
OEM "Dot" connector (performance similar to OEM "Minus" connector)
OEM 5lb trigger spring (why mess with success)
OEM standard slide stop lever (like)
OEM RSA (requires less clearance)

Trigger performance :
Reduced reach (LOP)
Very short take-up
Defined wall
Average pull weight is 2lb - 4oz
Very short reset
I like it there for a range gun, but I would bump it up to 4lb+ for a SD gun

ETA:
These are 80% complete frames and are shipped to your mailbox.
You mill/cut four tabs on the top of the frame, cut out a bulkhead inside the frame and drill 3 (6) holes.
_________________________
NO STEP ON SNEK

Top
#1007002 - 04/12/19 05:35 PM Re: The Polymer 80 Glock Frame [Re: Direct-Drive]
5 * General Evo Offline
Lord of the Chums

Registered: 03/29/14
Posts: 6825
thats a pretty cool pistol DD...

is there actually any differences than just doing all the upgrades to a standard Glock, vs building it yourself, not counting price?

can you get more accuracy?
_________________________
BLM IS A TERRORIST ORGANIZATION
ANTIFA IS A TERRORIST ORGANIZATION


Top
#1007006 - 04/12/19 06:04 PM Re: The Polymer 80 Glock Frame [Re: 5 * General Evo]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 8060
Loc: Vancouver, WA
The big thing of course is that there is no serial number.
No 4473 form required.
CA has already banned them and Polymer 80 had to create a "serialized" line for the CA market.
The other thing is ergonomics.
Glock has a 22 degree grip angle.
P80 has an 18 degree grip angle which is similar to 1911 and it's a slimmer grip.

Accuracy is a function of barrel quality and also the lock-up.
Quality Glock aftermarket drop-in barrels must be easy to manufacture because there are a lot of them.
That KKM from Carson City is one of the standouts and they are moderately priced.
There are only a couple of barrel makers doing hand fitting on Glock barrels.
_________________________
NO STEP ON SNEK

Top
#1007011 - 04/12/19 07:33 PM Re: The Polymer 80 Glock Frame [Re: Direct-Drive]
NickD90 Offline
Shooting Instructor for hire

Registered: 10/26/10
Posts: 7260
Loc: Snohomish, WA
Nice build. They make those 80 lowers in a 10mm?
_________________________
“If the military were fighting for our freedom, they would be storming Capitol Hill”. – FleaFlickr02

Top
#1007015 - 04/12/19 08:25 PM Re: The Polymer 80 Glock Frame [Re: NickD90]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 8060
Loc: Vancouver, WA
Originally Posted By: NickD90
Nice build. They make those 80 lowers in a 10mm?

Yes, they just released them.
The model PF45 is the Polymer 80 large frame lower.
The problem is finding a large frame slide.
Used G20/G21 slides are scarce and expensive.
You could do 45ACP 45 Super 460 Rowland 10mm or 9x25 Dillon.

The best hope is that Lone Wolf Distributors will resume production of their aftermarket large frame slides.

https://www.polymer80.com/media/wysiwyg/...s_-_AB_Edit.pdf

There are several ways to deal with the frame prep.
You don't need a mill or drill press.
I used a flush-cutting end nipper, cordless drill, hand files and a sanding block made from a 3/4" x 8" piece of glass.

Fastcap flush cutting end nipper


10mm Polymer 80 w/KKM compensator, Trijicon RMR, Agency trigger
_________________________
NO STEP ON SNEK

Top
#1007031 - 04/13/19 10:01 AM Re: The Polymer 80 Glock Frame [Re: Direct-Drive]
NickD90 Offline
Shooting Instructor for hire

Registered: 10/26/10
Posts: 7260
Loc: Snohomish, WA
Oooooo….Maybe time for a new build. Thanks,
_________________________
“If the military were fighting for our freedom, they would be storming Capitol Hill”. – FleaFlickr02

Top
#1007036 - 04/13/19 10:34 AM Re: The Polymer 80 Glock Frame [Re: Direct-Drive]
5 * General Evo Offline
Lord of the Chums

Registered: 03/29/14
Posts: 6825
that G20 is exactly the type of pistol i want to get the next time around... i did shoot the Army RSO's G21-C, but i was actually thinking with the slits in the barrel at around the 2/3 mark, doesnt the bullet lose speed?

your comp on the end, removes that factor...

i did like the looks of the 2 slots in the top of the slide tho, but it also throws gas half way down the pistol, vs yours is out the front of it...

very nice DD...
_________________________
BLM IS A TERRORIST ORGANIZATION
ANTIFA IS A TERRORIST ORGANIZATION


Top
#1007046 - 04/13/19 12:56 PM Re: The Polymer 80 Glock Frame [Re: 5 * General Evo]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 8060
Loc: Vancouver, WA
Originally Posted By: Evo
that G20 is exactly the type of pistol i want to get the next time around... i did shoot the Army RSO's G21-C, but i was actually thinking with the slits in the barrel at around the 2/3 mark, doesnt the bullet lose speed?

your comp on the end, removes that factor...

i did like the looks of the 2 slots in the top of the slide tho, but it also throws gas half way down the pistol, vs yours is out the front of it...

very nice DD...

The G20 is not mine...just a stolen pic from the interwebz.
The factory compensated Glocks are sucky, IMO.
I don't think G20 needs a comp...I have a factory G20.
It is a sweet shooter.

Now 9x25 Dillon...that one might need a comp.

9x25 Dillon Flameshow

Wouldn't it be fun to light that up while the RSO was waddling around ?
_________________________
NO STEP ON SNEK

Top
#1007047 - 04/13/19 12:59 PM Re: The Polymer 80 Glock Frame [Re: ]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 8060
Loc: Vancouver, WA
Originally Posted By: Myassisdragon
DD,

Very nice Model 19 work right there .

Like Nick, you might have pushed me into a 10mm parts search and build ! My model 19 wife just gave me the nod for the 10mm bear protection !

Sweeet rainy daze, I may get both the 6.5 Grendel Pistol, and a new 10mm for some fall hikes in the woods.

Thanks
It's just brutal trying to find a large frame Glock slide right now without your wallet getting butt-raped.
Hopefully a mfr. or two will step up and start a large frame slide program.
_________________________
NO STEP ON SNEK

Top
#1008225 - 05/03/19 03:55 PM Re: The Polymer 80 Glock Frame [Re: Direct-Drive]
Dogfish Offline
Poodle Smolt

Registered: 05/03/01
Posts: 10979
Loc: McCleary, WA
I have the original P80, actually 2 of them. Went 9mm on mine.

The next step I made was making a milling box for ar9,AR10, ar15 receivers. Building a few AR pistols in .45acp and 10mm.

Milling an AR lower


Edited by Dogfish (05/03/19 03:56 PM)
_________________________
"Give me the anger, fish! Give me the anger!"

They call me POODLE SMOLT!

The Discover Pass is brought to you by your friends at the CCA.

Top
#1008232 - 05/03/19 06:41 PM Re: The Polymer 80 Glock Frame [Re: Dogfish]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 8060
Loc: Vancouver, WA
Nice !

My P80 (G19 clone) is getting to be my favorite pistol.
Mastering the Glock trigger is challeging IMO, but the groups are closing up.
Here's a 50 foot target, two-handed...
_________________________
NO STEP ON SNEK

Top

Moderator:  Bob, Jerry Garcia, ReiterRat, Sky-Guy 
Search

Site Links
Home
Our Washington Fishing
Our Alaska Fishing
Reports
Rates
Contact Us
About Us
Recipes
Photos / Videos
Visit us on Facebook
Today's Birthdays
CHUBS
Recent Gallery Pix
hatchery steelhead
Hatchery Releases into the Pacific and Harvest
Who's Online
1 registered (stonefish), 1114 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
John Boob, Lawrence, I'm Still RichG, feyt, Freezeout
11498 Registered Users
Top Posters
Todd 28170
Dan S. 17149
Sol Duc 16138
The Moderator 14486
Salmo g. 13521
eyeFISH 12766
STRIKE ZONE 12107
Dogfish 10979
ParaLeaks 10513
Jerry Garcia 9160
Forum Stats
11498 Members
16 Forums
63773 Topics
645302 Posts

Max Online: 3001 @ 01/28/20 02:48 PM

Join the PP forums.

It's quick, easy, and always free!

Working for the fish and our future fishing opportunities:

The Wild Steelhead Coalition

The Photo & Video Gallery. Nearly 1200 images from our fishing trips! Tips, techniques, live weight calculator & more in the Fishing Resource Center. The time is now to get prime dates for 2018 Olympic Peninsula Winter Steelhead , don't miss out!.

| HOME | ALASKA FISHING | WASHINGTON FISHING | RIVER REPORTS | FORUMS | FISHING RESOURCE CENTER | CHARTER RATES | CONTACT US | WHAT ABOUT BOB? | PHOTO & VIDEO GALLERY | LEARN ABOUT THE FISH | RECIPES | SITE HELP & FAQ |