Hi Everyone- I have developed a slow leak in one of my pontoons. Any ideas as to the best way to find the leak and for quick fixes? Or even not so quick. The boat is one of the Leigh Outdoor models in case it matters. Thanks in advance.
***Thanks for the advice. I'll give it a shot.***

[This message has been edited by in2fish (edited 12-11-2000).]

If it is coming from the valve, you may only need to tighten the center section to stop the leak. If it is a small puncture in the body of the bladder you can fix it with a good quality tape over the puncture (you can find it with soapy water - it will bubble). if ti is leaking from the seam, send it to the factory.
Good luck!