Hull:
1998 G3 aluminum flatbottom
16’ X 48 “
all welded
removable treated ply wood floorboards with marine carpet
After market permanent gas tank (approx 12 gallons) from motion marine
Olive drab paint

Motor:
1998 40hp Yamaha Jet Drive
Tiller control
Two stroke
Oil Injected
Bought new in 2000 (have original bill of sale)
Runs perfect

Extras:
MinnKota 55lb thrust transom mount electric, less than 3 months old
One cranking battery and one deepcycle (dc also less than 3 months old)
New MinnKota battery charger
Side mount ride holders for storage
2 fishon rod holders for backtrolling
Fish finder
Bilge pump
Lots of bow storage

I bought this boat almost a year ago. I am the second owner, and just like the first it was always stored in the garage. If your looking for an excellent no frills, fish catching machine, this is it. This boat would also make an excellent duckhunting rig as well. It is very easy to boondog with (can be done with either the electric or main). It gets in ultra skinny water and if you do get stuck, it’s very light and easy to get unstuck. I usually just fished 2 people out of it, but 3 can be done. The trailer is in good shape and I’ve always lubed the bearings.
It kills me to sell this boat, but Uncle Sam says I must go to Germany for a few years and I can’t take my favorite toy. Asking price is $4800
If interested email to nwdewfour@yahoo.com

Here is a link to some pics from the week I took it home (approx 1 year ago). The bow mount motor is gone and I also installed a seat on the rear bench.


http://www.steelheader.net/ubbthreads/sh...5/o/all/fpart/1

Thanks
Chris (RL)

TTT

Price reduced to $4500....plus will throw in a GLoomis STR 1141 GL3 (1 year old and in great shape)

Well????

A couple ?'s: How thick is the bottom, how high are the sides (do you worry about wakes), top speed and how is it with a load of three backtrolling??

MH

Bankbound,

The hull gauge is .100, sides are 21" high.
Is it a thick skinned V'd boat?....No. But I have never felt unsafe in it. You're definately closer to the water than you would be in say a semii-v but I have never had any problems with wakes. I fish the Cowlitz quite a bit and that place is a wake factory.
As far as a load of three guys goes......that depends on the size of the guys. This boat is pretty much a two man show, but if all three were a little on the smaller side, it could be done effectively.

Thanks
RL

Here is link to a new thread with some more (current) pictures.

http://www.steelheader.net/ubbthreads/sh...&PHPSESSID=

Thanks
RL