Check

 

Defiance Boats!

LURECHARGE!

THE PP OUTDOOR FORUMS

Kast Gear!

Power Pro Shimano Reels G Loomis Rods

  Willie boats! Puffballs!

 

Three Rivers Marine

 

 
Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#60163 - 11/30/05 02:32 AM A few quality rods
Anonymous
Unregistered


Loomis STR 1201c IMX 10-ft, 6-10lbs, $300 (firm)
- In good shape, rare factory rod, awesome summer-run steel drifting with corkie and fly. Pre-Shimano.

Loomis STR 1082c IMX 9-ft, 6-10lbs, $260
- Used just a couple of times and in excellent shape. Pre-Shimano factory rod.

Loomis STR 1082s GL2 9-ft, 6-10lbs, 2 for $160
- Both rods have been used pretty hard, but are still in good fishing shape. If you need a couple of workhorses for dragging bait these are it. These pre-Shimano factory rods have caught countless steelhead and shad.

Loomis HSR 1021s 8'6", 10-20lbs $130
- Used just a few times off the pier slinging darts. Good condition. Factory rod, champagne- colored blank.

100 okies: 60 rainbow (nickel-size), 40 sunrise(dime-size) $65 (firm) for the lot
- Never used, hollow plastic. All hand selected from my personal stash. No broken. All bagged and sealed, 10/bag, for long-term storage.

Lami 1000-Series 8'6" casting, 10-20lbs, 2-pc $50
- Old style workmanship/guides. Decent shape.

Lami 1000-Series "Puget Jigger" 7'6" casting, 12-25lbs 1-pc $50
- Decent shape. Can double as a back-bouncer.

Lami 1000-Series 5'6" spinning, 2-6lbs 1-pc $40
- Never used. Says "2-6 lbs" but feels more like a smallmouth rod with a 6-8 lb action. Throwing Roostertails or skipping a tube perhaps?

Lami E-glass 7'6" casting, 10-20lbs 1-pc $50
- Medium cranking rod. Good Shape. Factory rod.

Lami E-glass 7'" spinning, 8-17lbs 1-pc $50
- Good shape. Factory Rod. Hint: FlashMinnow

Top
#60164 - 11/30/05 02:42 AM Re: A few quality rods
Anonymous
Unregistered


Whoops the e-glass spinner is 7 ft 6 inches.

I also have Webster Jigs, if anyone is interested.
25 per bag. $85 per bag. Anchovie frog, Turquoise/chartruese butt, and pink/chart butt.

Seattle, Redmond or Bellevue only please.

Top
#60165 - 11/30/05 05:08 AM Re: A few quality rods
_mtlhead Offline
Juvenille at Sea

Registered: 10/15/05
Posts: 126
Loc: Arlington, WA
Loomis STR 1201c IMX 10-ft, 6-10lbs, $300 (firm)
dive me a week on this and i'll take it.
_________________________
"Doing it right the first time is not an option, it's a requirement"

Top
#60166 - 11/30/05 12:40 PM Re: A few quality rods
Anonymous
Unregistered


Right on. You will not be disappointed with this rod. Call me (Bob Marley) at (425)861-5273 and leave a message with a contact number. And I'll call you right back.

Top
#60167 - 12/01/05 12:21 PM Re: A few quality rods
Jersey Fresh Offline
Parr

Registered: 01/21/00
Posts: 73
Loc: Seattle, Washington
Hmmm... that's an interesting mix of sticks...

Top
#60168 - 12/02/05 12:48 AM Re: A few quality rods
Captain Offline
Returning Adult

Registered: 10/16/99
Posts: 324
Loc: Enumclaw, Washington, USA
I'm interested in the Lami 1000-Series 8'6" casting, 10-20lbs, 2-pc $50. Please reply with contact information to make arrangements. Thanks, Captain

Top
#60169 - 12/02/05 01:39 AM Re: A few quality rods
Anonymous
Unregistered


Captain, Call me at (425)861-5273. I'll be in and out of my office tonight, so leave me a number to call you back at. I'll be in the sound end (Sportco in Fife) tomorrow morning, maybe we can hook up...Bob

Top
#60170 - 12/05/05 02:41 PM Re: A few quality rods
Anonymous
Unregistered


The 1082c IMX is gone. Sold to the dude from New Jersey. Thank you Mr. Fresh.

Top
#60171 - 12/06/05 04:05 PM Re: A few quality rods
Anonymous
Unregistered


The 1310 lami is gone. Sold to the Captain. I have a couple other rods on the chopping block.

SR842-2 GL3 7' 4-8lbs $140

SR843-2 GL3 7' 4-10lbs $150
- Pre-Shimano factory rods. Fair-good condition. Awesome smallmouth rods. Also, heavy trout or daytime squid rods.

SUR1324s 11' 12-30lbs $200
- This is the Westport dream rod for the bank maggot. Perch in the surf, lings and bass off the jetty, and heavy enough to fling a crabhawk. Used once, like new.

Cert Pro X96JS 9'6" 6-15lbs $75
- This was a great coho rod. Float and herring in the salt or float and eggs in the river. Small kings or dogs, no problem either. Fair condition.

50 spin-n-glos unused, newer-style(styrene). Medium-sized(sz. 8, I think). Perfect for heavy bottom bouncing or tandems. Even mix of classic colors, PP, RR, glow peach, and or orange scale. All with white wings. $25

1mtlhead, give me a hollar about the 1201 IMX. I have a couple other guys that want to take a look. Thanks...BobMarley

Top
#60172 - 12/06/05 05:47 PM Re: A few quality rods
Fish Chaser Offline
Juvenille at Sea

Registered: 01/24/01
Posts: 231
Loc: Edgewood,WA
I would like to talk to you about the Cert Pro. call me 253-334-0009

Top
#60173 - 12/06/05 06:18 PM Re: A few quality rods
Anonymous
Unregistered


The cert pro is gone. Sold to Fish Chaser.

Top
#60174 - 12/07/05 12:19 PM Re: A few quality rods
greatone28 Offline
Alevin

Registered: 12/15/04
Posts: 14
Loc: bellingham
I may be intrested in the puget jigger if still available. I would love to see a pic if possible. Thanks

Top
#60175 - 12/07/05 01:45 PM Re: A few quality rods
Anonymous
Unregistered


The Puget Jigger is available. But, sorry no digital. It's the same factory model that sits on your favorite sporting goods rod rack. No gimmicks. It's just been sitting on my rack too long. There are a few scratches on the rod from moderate usage during blackmouth jigging season, and the cork is greying from old age since it has been sitting for at least 4 seasons. Other than that, it's ready to fish. I believe it's made from the same blank as the "Medium Bouncer" that Lami produced.

Top
#60176 - 12/07/05 02:57 PM Re: A few quality rods
FISHJAK Offline
Fry

Registered: 10/06/05
Posts: 22
GOT PICS OF 1082S???

Top
#60177 - 12/07/05 05:32 PM Re: A few quality rods
Anonymous
Unregistered


Nope. No digital camera (that works). Both rods factory pre-Shimanos and ready to fish. Color is dark blue, similar to the Neptune they now have. Nothing functionally wrong with them. I just upgraded to higher mod sticks and won't be using them anymore. One is in good condition ($90) the other is in fair condition ($80). If you buy both, my asking price is $160. I promise to wash off as much of the dried egg goo and sandshrimp juice as I can.

Top
#60178 - 12/07/05 05:46 PM Re: A few quality rods
Anonymous
Unregistered


The surf rod and the SR843-2 have been sold.

If anyone outside the Seattle area wants the okies or spin-n-glos, I can send in the mail for a few bucks more.

Christmas is coming up. One of you dads wants that 5'6" Lami for your boy. It's a high quality little stick with a lifetime warranty. And for $35 (price reduced) that's getting away really cheap nowadays. Seattle or surrounding area for this one, please.

Top
#60179 - 12/07/05 08:43 PM Re: A few quality rods
Fish Chaser Offline
Juvenille at Sea

Registered: 01/24/01
Posts: 231
Loc: Edgewood,WA
just for grins, bring the okies with you on friday if you still have them

Top
#60180 - 12/08/05 04:58 AM Re: A few quality rods
Anonymous
Unregistered


Bob,
if you got some others on the line for the IMX, cut it loose. I got hit with some bad news this week and need to repay (thanks to usps) for a reel I bought a few weeks ago, the money order never arrived and I have to wait 60 days before they will allow me to start the lost-claim process.

Top
#60181 - 12/12/05 09:45 AM Re: A few quality rods
Anonymous
Unregistered


Cool, the 1201IMX is sold. [Bleeeeep!] FC, I wish I would have seen your email otherwise I would've brought the okies. Hope the Cert Pro works out for you...BM

Top
#60182 - 12/12/05 10:33 AM Re: A few quality rods
Fish Chaser Offline
Juvenille at Sea

Registered: 01/24/01
Posts: 231
Loc: Edgewood,WA
That's alright, Hey thanks for the rod and good luck with everything.

Top
Page 1 of 2 1 2 >

Search

Site Links
Home
Our Washington Fishing
Our Alaska Fishing
Reports
Rates
Contact Us
About Us
Recipes
Photos / Videos
Visit us on Facebook
Today's Birthdays
Al Gore, czer, Robb92, wallyw
Recent Gallery Pix
hatchery steelhead
Hatchery Releases into the Pacific and Harvest
Who's Online
1 registered (steely slammer), 1217 Guests and 1 Spider online.
Key: Admin, Global Mod, Mod
Newest Members
John Boob, Lawrence, I'm Still RichG, feyt, Freezeout
11498 Registered Users
Top Posters
Todd 28170
Dan S. 17149
Sol Duc 16138
The Moderator 14486
Salmo g. 13526
eyeFISH 12767
STRIKE ZONE 12107
Dogfish 10979
ParaLeaks 10513
Jerry Garcia 9160
Forum Stats
11498 Members
16 Forums
63781 Topics
645410 Posts

Max Online: 3001 @ 01/28/20 02:48 PM

Join the PP forums.

It's quick, easy, and always free!

Working for the fish and our future fishing opportunities:

The Wild Steelhead Coalition

The Photo & Video Gallery. Nearly 1200 images from our fishing trips! Tips, techniques, live weight calculator & more in the Fishing Resource Center. The time is now to get prime dates for 2018 Olympic Peninsula Winter Steelhead , don't miss out!.

| HOME | ALASKA FISHING | WASHINGTON FISHING | RIVER REPORTS | FORUMS | FISHING RESOURCE CENTER | CHARTER RATES | CONTACT US | WHAT ABOUT BOB? | PHOTO & VIDEO GALLERY | LEARN ABOUT THE FISH | RECIPES | SITE HELP & FAQ |