Check

 

Defiance Boats!

LURECHARGE!

THE PP OUTDOOR FORUMS

Kast Gear!

Power Pro Shimano Reels G Loomis Rods

  Willie boats! Puffballs!

 

Three Rivers Marine

 

 
Page 16 of 16 < 1 2 ... 14 15 16
Topic Options
Rate This Topic
#643088 - 12/10/10 10:16 PM Re: Obama gun ban process is starting. [Re: ]
Dave Vedder Offline
Reverend Tarpones

Registered: 10/09/02
Posts: 8587
Loc: West Duvall
Originally Posted By: Hankster
I worked for half a day and then went to the annual Christmas party at the Cliff House. Fine dinin', good times making fun of the doctors, bonus checks, Safeway gift cards. Good time had by all.

When I get this stinkin' cast boot off my foot I hope to do a little steelie fishin' myself.

Thanks for askin'.


Love the Cliff House. Dine there everytime i visit my S.F. Client. NCIRE
_________________________
No huevos no pollo.

Top
#643089 - 12/10/10 10:17 PM Re: Obama gun ban process is starting. [Re: Dogfish]
The Moderator Offline
The Chosen One

Registered: 02/09/00
Posts: 14486
Loc: Tuleville
I worked. People seemed to torment me by breaking their 'puters today.

Now, I'm quaffing a pint of Alysian Perseus Porter (currently on tap in my basement) and I'm wondering where the best source for 7.62x51mm ball ammo is.

I haven't had a need for surplus .308 since I sold off my HK91.

Anyone have about 500 rounds of ball ammo they want to sell me?

Or trade? Got a great Olympus camera or IMX 1088 8wt! wink

Now that I have a new M1A to play with, I gotta put a few rounds down range with it, as well as be further stocked up when the zombie invasion begins.
_________________________
Tule King Paker

Top
#643093 - 12/10/10 10:22 PM Re: Obama gun ban process is starting. [Re: The Moderator]
Dogfish Offline
Poodle Smolt

Registered: 05/03/01
Posts: 10979
Loc: McCleary, WA
Should have bought the AR-10.

Save your brass, because I'm set up to reload for .308 on my progressive.
_________________________
"Give me the anger, fish! Give me the anger!"

They call me POODLE SMOLT!

The Discover Pass is brought to you by your friends at the CCA.

Top
#643097 - 12/10/10 10:25 PM Re: Obama gun ban process is starting. [Re: Dogfish]
The Moderator Offline
The Chosen One

Registered: 02/09/00
Posts: 14486
Loc: Tuleville
I've heard the M1A is a bit "hard" on the brass as it ejects. Don't know if one can install an ejection port buffer on it, or not.

Anyone M1A owners out there confirm this?

Until I installed the buffer on the HK91, the brass would damn near be bent in half as it was ejected!!!

Any interest in 30-06 brass? I like to chew through those rounds with the M1 Garand!
_________________________
Tule King Paker

Top
#643101 - 12/10/10 10:27 PM Re: Obama gun ban process is starting. [Re: The Moderator]
Dogfish Offline
Poodle Smolt

Registered: 05/03/01
Posts: 10979
Loc: McCleary, WA
I have a few thousand, but if you are tired of storing it....
_________________________
"Give me the anger, fish! Give me the anger!"

They call me POODLE SMOLT!

The Discover Pass is brought to you by your friends at the CCA.

Top
#643138 - 12/10/10 11:28 PM Re: Obama gun ban process is starting. [Re: ]
Dogfish Offline
Poodle Smolt

Registered: 05/03/01
Posts: 10979
Loc: McCleary, WA
Small pen syndrome, Marsha.
_________________________
"Give me the anger, fish! Give me the anger!"

They call me POODLE SMOLT!

The Discover Pass is brought to you by your friends at the CCA.

Top
#643198 - 12/11/10 02:31 AM Re: Obama gun ban process is starting. [Re: ]
Todd Offline
Dick Nipples

Registered: 03/08/99
Posts: 28170
Loc: Seattle, Washington USA
Besides the pleasure of buying Stam dinner tonight...ah, hell...you wouldn't belive it if I told you.

Todd will get very little sleep tonight, and will be fuckinfantasticallygood with that smile

Fish on...

Todd

P.S. NIce hanging out with you, Steve...it's been too long, glad we got the chance tonight.
_________________________


Team Flying Super Ditch Pickle


Top
#643368 - 12/11/10 08:49 PM Re: Obama gun ban process is starting. [Re: The Moderator]
Steve Ericsson Offline
Spawner

Registered: 10/31/02
Posts: 541
Loc: Olympia, Wa
Originally Posted By: parker


Now, I'm quaffing a pint of Alysian Perseus Porter (currently on tap in my basement) and I'm wondering where the best source for 7.62x51mm ball ammo is.

I haven't had a need for surplus .308 since I sold off my HK91.

Anyone have about 500 rounds of ball ammo they want to sell me?


Have you tried www.ammoman.com? AMMOMAN.COM

I allegedly may/may not have purchased 7.62x51mm ammo from them in the recent/not so recent past. Great prices, and most of all FREE SHIPPING! 500 or 1000 rounds weighs a lot and it's the shipping that kills you on cost.

Click on the link in the blue box for 308/7.62x51 and scroll down to the Dynamit-Noble (GERMAN) - NATO 7.62x51mm 147 GRAIN FMJBT BALL. I can attest that it is great ammo. They also get some from time to time that has slight case corrosion from storage and they sell it bulk in a .50 cal ammo can at around $200/500 rounds. I may/may not have an HK91 that may/may not eat this stuff all day long. I may/may not have 1000 rounds of WOLF too, and while I like their new anti-corrosion olive coating on their shell casings, it is some really dirty ammo. I may/may not have burned through 20 20rnd mags of the Dynamit-Nobel last time I fired it, and my alleged weapon was as dirty as the first 20rnd mag of WOlf FMJ. It is the cheapest I have found, and the best bang for the buck, so to speak. $.50 / round is pretty much normal these days, true knock-down power does not come cheap anymore!!

But, please keep in mind the above text is all supposed and alleged and may/may not be completely fictional in nature. The names have been changed to protect the innocent.


Edited by Steve Ericsson (12/11/10 08:52 PM)
Edit Reason: link clarification
_________________________
Organized people are just too lazy to look for things.

Top
#643379 - 12/11/10 09:15 PM Re: Obama gun ban process is starting. [Re: The Moderator]
RowVsWade Offline
River Nutrients

Registered: 11/08/06
Posts: 3405
Loc: Island Time
Originally Posted By: parker
I've heard the M1A is a bit "hard" on the brass as it ejects. Don't know if one can install an ejection port buffer on it, or not.

Anyone M1A owners out there confirm this?


Parker----My M1A is not hard on brass. It has a positive tight extractor but it doesn't trash my brass like an FAL or the like (it does leave a bit of evidence that the round was violently extracted at some point of its life however it's only around the rim in the form of a small indent.) Fulton Armory has a buffer...I have no idea whether or not it works as you'd like. I have NM'd my M1A with Sadlak and it's very smooth and clean all around so I've not felt the need to worry about brass...a least not for what this rifle was designed to do.
_________________________
"...the pool hall I loved as a kid is now a 7-11..."

If you don't like our prices bring your wife down and we'll dicker.

Top
#643380 - 12/11/10 09:17 PM Re: Obama gun ban process is starting. [Re: RowVsWade]
RowVsWade Offline
River Nutrients

Registered: 11/08/06
Posts: 3405
Loc: Island Time
From Fulton Armory website.

The M1A/M14 Buffer Technologies Recoil Buffer fits on the recoil spring guide rod of all M1A and M14 based rifles, regardless of manufacture. As with all other models of the Recoil Buffer, installation is simple and can be done without any special tools.
The Buffer Technologies M1A/M14 Recoil Buffer differs from others in our line of products, in that it does not end the metal to metal contact of the bolt to receiver. For a M1A/M14 to operate reliably, the bolt must impact the receiver with each firing of the weapon. This contact is required to prevent excessive stress on the roller cam on the side of the bolt.
The Buffer Technologies M1A/M14 Recoil Buffer eliminates the metal to metal contact of the operating rod to the front of the receiver. The M1A/M14 Buffer Technologies Recoil Buffer will protect your operating rod, the weak link in the M1A/M14 system, from excessive shock.

With the Buffer Technologies M1A/M14 Recoil Buffer installed you have less felt recoil, more muzzle stability, less action noise, and will extend the service life of your weapon.
_________________________
"...the pool hall I loved as a kid is now a 7-11..."

If you don't like our prices bring your wife down and we'll dicker.

Top
#730070 - 01/03/12 06:12 PM Re: Obama gun ban process is starting. [Re: RowVsWade]
Todd Offline
Dick Nipples

Registered: 03/08/99
Posts: 28170
Loc: Seattle, Washington USA
It's hard to believe, isn't it?

Over three years of having a Nigerian Kenyan Socialist Muslim Islamo-Fascist in the White House...and still, no guns have been grabbed.

Leastwise...none of mine have.

Any of the chicken littles have a gun grabbed yet?

Don't bother...I know you haven't...just keeping us up to date on the grabbings...or lack thereof.

Fish on...

Todd
_________________________


Team Flying Super Ditch Pickle


Top
#730073 - 01/03/12 06:17 PM Re: Obama gun ban process is starting. [Re: Todd]
stlhead Offline
River Nutrients

Registered: 03/08/99
Posts: 6830
I had someone try to grab my junk but that was just Illy.
_________________________
"You learn more from losing than you do from winning." Lou Pinella

Top
#730158 - 01/03/12 11:01 PM Re: Obama gun ban process is starting. [Re: stlhead]
Illyrian Offline
Repeat Spawner

Registered: 12/20/09
Posts: 1478
Loc: Spokane, wa
lamer

Top
Page 16 of 16 < 1 2 ... 14 15 16

Search

Site Links
Home
Our Washington Fishing
Our Alaska Fishing
Reports
Rates
Contact Us
About Us
Recipes
Photos / Videos
Visit us on Facebook
Today's Birthdays
3Gonads, herm
Recent Gallery Pix
hatchery steelhead
Hatchery Releases into the Pacific and Harvest
Who's Online
1 registered (steely slammer), 1085 Guests and 2 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
John Boob, Lawrence, I'm Still RichG, feyt, Freezeout
11498 Registered Users
Top Posters
Todd 28170
Dan S. 17149
Sol Duc 16138
The Moderator 14486
Salmo g. 13520
eyeFISH 12766
STRIKE ZONE 12107
Dogfish 10979
ParaLeaks 10513
Jerry Garcia 9160
Forum Stats
11498 Members
16 Forums
63773 Topics
645291 Posts

Max Online: 3001 @ 01/28/20 02:48 PM

Join the PP forums.

It's quick, easy, and always free!

Working for the fish and our future fishing opportunities:

The Wild Steelhead Coalition

The Photo & Video Gallery. Nearly 1200 images from our fishing trips! Tips, techniques, live weight calculator & more in the Fishing Resource Center. The time is now to get prime dates for 2018 Olympic Peninsula Winter Steelhead , don't miss out!.

| HOME | ALASKA FISHING | WASHINGTON FISHING | RIVER REPORTS | FORUMS | FISHING RESOURCE CENTER | CHARTER RATES | CONTACT US | WHAT ABOUT BOB? | PHOTO & VIDEO GALLERY | LEARN ABOUT THE FISH | RECIPES | SITE HELP & FAQ |