what glue do you use on your line knots

When connecting braid and fluorocarbon using double uni knots?

I used to use the uni knot for mono to braid until I discovered the "FG" knot……lower profile, stronger than the uni knot and no glue required.

Check it out on Youtube.

Glue shouldn't be needed on a double uni - that's a wee bit anal imo. Hint, double both of the main loops - no glue needed. If you just have to glue, zap-a-gap thin grade (flyshop). URW.

I watch the "FG" video, actually 5, I can see how it would work....just having a tough time, with my type of fishing, how I would use it????

Where do you use it???? Lay it on me!!!!!!!!

I've never glued that knot. Works fine without in my experience, but I mostly go power pro to maxima UG.

fb

+1

PP to Ultragreen no glue, pull hard, no break

If you need glue for a fishing knot, you're not tying it right. Seems to me, from a chemistry standpoint, the glue might even weaken the knot, depending on the materials.

If you need to use glue, something like Loon Knot Sense would be what I'd recommend.
I don't use it to glue knots, but I will use it to smooth knots out so they go through the guides easier when stripping in longer leaders.
Worked great this weekend on a perfection loop and a 10' leader.
SF

My understanding is that the glue keeps braid from fraying at the knot, never had that issue so never used it. I also use the power pro to maxima ug. Bob R

I've fished Power Pro for a loooooong time, always use a size #14 crane swivel, when I'm rigging for summer steelhead. Never a problem with fraying..


The above knot isn't in the following wed site:


http://www.animatedknots.com/indexfishing.php?LogoImage=LogoGrog.jpg

I use the improved cinch knot for everything.......works for me!!!!