to do it right its going to cost $$$$ they make a rake style anchor that will run $50-60 and then theres the line, rule in heavy current 100' out for every 10' down.. thats alot of line to mangage. i found 400' works.than there's the foats.. a small one for the end of your line $15 and a large one for the lift $50... then theres the lift. metal run $60 plastic run $20 Stevens marine also sells a kit that may cut cost...if you decide to use this set up i strongly suggest going somewhere quite and try it. and keep a knife handy. if that rope wraps your motor your going swiming and it will happen fast.one last tip. always go at an angle and pull from your bow when pulling up your anchor. if it sticks it will swing the bow around in an arch.. good luck and be sure to practice first a lot