Thought I would share how I store my drift rigs in my vest. first cut small blocks of wood,4" long 1" wide. tie your drift rigs up ,wider blocks need to be used if you use long leaders,wrap the rig around the block hook flat on the wood ,take a ruber band wrap that around the line and the hook the hook sould be wraped under the line.the next rig will be wraped with the hook slightly over laping the last continue untill the block is filled up depending how large the hooks are you should be able to keep 10 or so rigs on one block. when you fish take the rig off first you put on last.(snap!!!) if you did it right they will unravel right off .fits right in your vest i slide a small plastic cup in a vest pocket so the hooks dont snag (optional but a good Idea).I tie up 20 or so on a bunch of blocks with corkies and some times yarn too, just dont put those on the same side as the hooks. cheap, easy,fits in your vest and very fast. PS.save your rubber bands and reuse them . dont leave them on the bank thanks in advance.