In reviewing the bottom of my driftboat after 5 trips in low water, It became aparent that I needed to add some additional protection to the bottom of the boat.

I had a number of small dings in the epoxy that went through to the fiberglass. It wouldn't take long with that kind of damage to start eroding the bottom.

As of tonight there are now two coats of Gluv-it on the DB bottom, one full can. I am buying another tomorrow and will put on coats 3 and 4, maybe even a 5th. The first coat took a bit more to fill in the gaps between the chine and the boat.

Finally, this was the first bucket o' Gluv-it that I have purchased, does it come in a 5 gallon pail? The one gallon bucket really isn't a gallon anyway, more like 2.5 quarts. It must be that way for mixing, I guess.

Andy