Originally Posted By: P.W
Ok so why send it in, just find a pro to strip in butt and reseat the reelseat.

The other thing you could do rather than strip it down is, Mix up some 5 min epoxy and go to the feedstore buy a syringe, one giving dogs shots, inject some 5min through the cork to reseat the reel seat.

Might buy 2 syringes just to make sure you inject enough epoxy before the syringe is ruined.


good idea. i figure thats the better choice. the good thing about is that i have a allstar i had don put the same exact handle on. so if this wood cracks or gets ruined i have another handle i can have swapped.