Jhoskinson,

With the flow as high as it presently is, it's possible - but not advisable - to run a prop driven boat from Rockport to Marblemount. I've done it at much lower flows, but I also replace two shear pins in one day one time, so even with experience you have to be aware that the channel changes after high water events. Jet drive is much preferred.

You have to worry about log jams if you don't understand what's required to avoid getting sucked into them. Otherwise there's plenty of room to maneuver around and avoid them.

Boatmen hold their position for fishing either with oars or an electric or small gas kicker motor.

Sg