After reading the previous posts on this board about the pink worm, I thought I'd give it a try. I threaded a 4" worm on a 1/4 oz jig head and fished it under a float. I left about an inch hanging past the hook shank. I can see why Bob "The Really Big One" says no comment...meant to be taken as a hint when refering to the pink worm. I had four solid takes with this set-up. Unfortunately I completely missed two of the takes. The worm had squeezed back and had almost covered the exposed hook. What's the trick to keeping the hook exposed while threading the worm on the jig head? After I threaded the worm on, I would just push the hook through the worm up to the barb. This worked okay but it didn't look natural. Any hints on this rigging would be appreciated.
Mark