Originally Posted By: Jason Beezy
I want to get a drift boat motor setup to use for lower river upstream trolling, nearshore crabbing on calmer days, lake trolling, and of course drifting rivers.

I have read enough about motor wells on drift boats to think they aren't worth it. Sounds like they impact rowing, take up space, and aren't really needed if you get a long shaft motor.

Currently I'm thinking a 16' Willie with a 10HP long shaft. 15HP would likely be too heavy? I really want to be able to troll the lower Skagit River so enough power to do that would be best and if any of you are familiar with this area your advice is especially welcome.

Any advice or input is welcome. Thank you!

I have an 8HP Yamaha 2 stroke on mine....57 lbs IIRC.
It's a true 8HP....not a detuned 10 and it's all the HP my 16 Willie can use.
They made a 6HP out of this same powerhead.
This Yami uses 100:1 mix so it's not smokey.
Some 10s are detuned 15s....look at the bore/stroke and see what the mfr did with that powerhead.

No I would not hang a 15 on a DB.

Look at the weights...4 strokes will be heavier.
_________________________
NO STEP ON SNEK