Lipstick of death.

158gr hard cast bullets. SWC profile, poured a little hot so they frost a bit for better adhesion. Target fps is 1200 with a mid range Blue Dot load. Powder coated with jig head paint. Tittie pink was what I had handy. Toss bullets in the vibratory cleaner and turn it. Sprinkle in powdercoat until bullets are coated. About 30 seconds. Sift in a hardware cloth basket to remove excess and bake for 20 minutes at 300. Let cool, run through a Lee .358 sizer die, then load.

Powder coat survives on recovered bullets up to 2100 fps from my trials with .300 blackout. When you squeeze the bullets in the vise the powder coat doesn't flake off.