Check

 

Defiance Boats!

LURECHARGE!

THE PP OUTDOOR FORUMS

Kast Gear!

Power Pro Shimano Reels G Loomis Rods

  Willie boats! Puffballs!

 

Three Rivers Marine

 

 
Page 3 of 3 < 1 2 3
Topic Options
Rate This Topic
#695132 - 07/22/11 12:07 AM Re: .243 or .270?????????? [Re: ]
Driftin' Offline
Three Time Spawner

Registered: 04/29/06
Posts: 1725
Loc: Offshore
Originally Posted By: Schweet
Originally Posted By: chrome/22
As stated b4 have I both the aforementioned calibers in my rack, a Ruger M-77 in 270 & a tackdriving Winchester M-70 heavy varmint w/ 26" stainless bbl.

The Ruger is my hunter, the Winchester a nice target rifle.

When taking a shot on game the bigger 270 gets the nod, a 140 grain Nosler Accubond w/ its .496 bc & 3000 fps mv bucks crosswinds & slices atmosphere.

Gonna have to make do till that .338 Lapua magically shows up.



c/22


The 140 cain't hang with a 22" SAAMI 243Win.

I'd rather be slingin' 162's,than beating on things with my 1-10" 338Ultra. Tough to arrange a 338Lapua that's throated/twisted right,over the counter. Many are 12",which slams doors from the get-go. Really very tough to beat the Ultra,when talking .338" bores and a repeater. The 250 and 300 Scenar's are tough acts to follow,though I've been praying to Little Baby Jeezus for a .338" A-Max for many moons(would like 'em in .257" too).

It's ALL about the boolit and .277's are hosed for that reason,whether they SPC,06,Wby or otherwise.



Brad,
You're up!

I'll go work on some popcorn....

smile

Top
#695148 - 07/22/11 01:26 AM Re: .243 or .270?????????? [Re: Driftin']
chrome/22 Offline
Captain C/22 - Team Stay Up Right!

Registered: 01/13/00
Posts: 4194
Loc: Hurricane Ridge , Wa.
Stick & could chase tails all week, talking ballistic coefficients & sectional density, maintaining sub MOA @ extreme distance & the effect of the lunar cycle on the rotational speed of a streamlined projectile.

What it comes down to are two different applications of the hunting rifle. Mine is more traditional, the hunting of pronghorn, mule deer & elk with shots of 300 yards or much less if possible, while having rifle, ammo & mindset prepared to take a 400+ yard shot if conditions demand & I feel I can hit it.

His discipline is more modern & complex, the shooting of coastal blacktail deer @ distance from the high ground, employing a well rested rifle, laser rangefinder & a repeatable turreted scope.

Now, his black bear hunting falls more into a spot & stalk mode. But he, I think, will be first to admit that the 2 calibers under discussion wouldn't be anyone's 1st choice.


Pass the popcorn.


c/22
_________________________
Apocalypse Steelheader.
Chucking gear as the end draws near.

Top
#695177 - 07/22/11 09:41 AM Re: .243 or .270?????????? [Re: ]
Schweet
Unregistered


First it's O'Connor and secondly,he was King Of The Dinks,during The Age Of The HOGS. Folks like Elgin Gates were lightyears ahead of poor JOC,during the very same era. JOC could simply right purty,which enthralled the clueless,by his outpouring of fluff. I'm far more Meat & Taters and am at ease denoting things how they is and will leave purty to them who dabble in fluff.

All chamberings change in their relative merit,due to boolit selection and it never doesn't not amaze me,as to how many reliably miss that and by a mile. One's rifle doesn't get heavier,longer,lose balance/handling nor are there any other concessions inherent in operating with a clue. Many are under the illusion that they gotta boldly take gear to Star Wars Technology,to eek the goody,which is very much not the case. Those gross misunderstangings,coupled with being totally devoid a ballistics clue,very often leads to rather amusing conversation(s). Shooting is only "hard" for those who don't shoot and it seems noone shoots anymore.

Just as few would take a great knife and dull it upon rocks before heading out on a Hunt,or cut seams in new boots or have their pooch chew holes in their new rainwear,it's curious to me that the masses enthrall in doing same to a rifle and upon many levels. With but an inkling of an understanding,it is very easy to field a platform at it's maximum inherent potential,as opposed to leaving 85% of that availability benign by default. All less concession.

Now those constants being said,I'd state plainly that the SAAMI 243Win is a literal GIANT Killer,as typically offered over the counter. Further,it is a great first choice for tipping Critters over at distances,that'd make most more than a leetle squeamish. Why is that? Simply due to projectile availability,within said bore sizing. When a 270Win's Trump Card is to "nearly mimic" 243Win performance,such things is enlightening to them with a clue. I'd liken it akin to chest waders that keep you almost as dry as hip boots,but not to the depths of the hippers. Such factoids leave little to get horned up about,whether it Theory or Application...yet the cats in the chest waders will never quit grasping at straws,as faint hope to satiate their cluelessness being "on purpose".

I dig it when folks start "telling" me stuff,factored by their "experience" and "results". Was looking forward to some scattergun fluff too.

You guys are on fire,keep at it!

Top
#695311 - 07/22/11 08:53 PM Re: .243 or .270?????????? [Re: ]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7960
Loc: Vancouver, WA
.243 Winchester is a nice round but I'd take my 6mm Remington first.
A little faster and a little purdier.
The one I'm in want of lately is 6BRX.
_________________________
NO STEP ON SNEK

Top
#695402 - 07/23/11 09:32 AM Re: .243 or .270?????????? [Re: Direct-Drive]
Schweet
Unregistered


I shoot 6mm and 6AI both,with equal disdain. They are hungchow in a short action and if going long,why form to less case capacity when the 6-06/6-06AI are so viable?

In a s/a the 6-284 is a better mousetrap than anything on the Mouser hull,due to COAL latitude...which brings a guy full circle back to boolits. A rifle can be no better than it's boolits and when COAL constraints preclude the good stuff,chamberings so plighted are easily passed upon,in order to get to the good stuff. Some boolits certainly rate building a rifle around and the aforementioned 105 is assuredly in such ranks.

The 243AI is 6MM Rem case capacity,with SAAMI 243Win COAL latitude. Win/win. The BR or any of it's Wildcat spawn,has never called me,mainly because I can't forget that I like speed. Same as 6mm's on the 223,22-250 or the like. Perhaps a PPC,if forced to suffer short range Bench Queen affairs. Very nice BC's at meaningful speeds,make a guy hate everything else.

I'm done with tight necks and long barrels too.

Top
#695412 - 07/23/11 10:16 AM Re: .243 or .270?????????? [Re: ]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7960
Loc: Vancouver, WA
Originally Posted By: Schweet
...why form to less case capacity when the 6-06/6-06AI are so viable?

Simple, to fit an AR magazine.
Those short, fat boiler rooms get it done in that platform.
Also competition bolt guns are proving that the design is worthy.
_________________________
NO STEP ON SNEK

Top
#695438 - 07/23/11 01:01 PM Re: .243 or .270?????????? [Re: ]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7960
Loc: Vancouver, WA
Originally Posted By: 2MANY
Real men shoot a bow, wear a loincloth and hide behind bushes.

Might as well go full-meal-deal grin
_________________________
NO STEP ON SNEK

Top
#695462 - 07/23/11 09:08 PM Re: .243 or .270?????????? [Re: ]
stlhdr1 Offline
BUCK NASTY!!

Registered: 01/26/00
Posts: 6312
Loc: Vancouver, WA
.300RUM... Best all around cartridge for real men/women or kids....

Keith
_________________________
It's time to put the red rubber nose away, clown seasons over.


Top
#695470 - 07/23/11 10:24 PM Re: .243 or .270?????????? [Re: stlhdr1]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7960
Loc: Vancouver, WA
Originally Posted By: stlhdr1
.300RUM... Best all around cartridge for real men/women or kids....

Keith

Made me think of this :
http://youtu.be/tBslqsP5UJw
_________________________
NO STEP ON SNEK

Top
#695492 - 07/24/11 09:27 AM Re: .243 or .270?????????? [Re: Direct-Drive]
Schweet
Unregistered


Originally Posted By: Direct-Drive
Originally Posted By: Schweet
...why form to less case capacity when the 6-06/6-06AI are so viable?

Simple, to fit an AR magazine.
Those short, fat boiler rooms get it done in that platform.
Also competition bolt guns are proving that the design is worthy.


I've no interest with a .473" or greater boltface on a '15. Go AR-10 of course and you've 2.800" or better COAL to work with. I'd much rather have a 243 or 243AI on a '10,than any 6mm shoe-horned into a '15. Fact is a "short" barreled SAAMI 243Win on a '10,is a rather wicked machine. I'm not hip on feeding self shuckers with brass that's $1 a pop,while polishing a turd to boot.

I'd hang pics,but someone would wanna pay me to place them in a magazine. Pun intended.

The 6BR/X as a LR belly gun in F-Class or similar,are typically laden with very long spouts,many of which are 28" if not 30". Pass the 22" 243/243AI and hold the fluff.

Top
#695493 - 07/24/11 09:35 AM Re: .243 or .270?????????? [Re: stlhdr1]
Schweet
Unregistered


Originally Posted By: stlhdr1
.300RUM... Best all around cartridge for real men/women or kids....

Keith


If it were shortened to 2.500" or so,like the lopped H&H spawn(264Win,7mmRem,270Wby,7Wby,etc),it'd be sumptin'. As it sets,the 300 Ultra is very COAL stingy,beings it has no wiggle room to work with as a repeater fed high BC's. Which of course is part of the appeal in the 338Ultra and it's shorter hull.

Folks is to quick to fixate headstamps,which mean far less than boolit selection. Very easy to coax a .625BC kissing lands from within it's box,ala 7mm RemMag on a 700 and it'll always steal the show,with 3100fps from a 24" being a breeze. It's the free-est of lunches,regarding relative "Oooomph",residual speed,wind bucking and bang for the buck,on top of minimal felt recoil.

The big picture escapes most,if not all.(grin)

Top
#695501 - 07/24/11 10:44 AM Re: .243 or .270?????????? [Re: ]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7960
Loc: Vancouver, WA
Originally Posted By: Schweet
Originally Posted By: Direct-Drive
Originally Posted By: Schweet
...why form to less case capacity when the 6-06/6-06AI are so viable?

Simple, to fit an AR magazine.
Those short, fat boiler rooms get it done in that platform.
Also competition bolt guns are proving that the design is worthy.

I've no interest with a .473" or greater boltface on a '15. Go AR-10 of course and you've 2.800" or better COAL to work with.

That's the allure. The Grendel and/or SPC based 6mm's strain to reach 2800 which isn't bad. The 6BRX is over 3000 with a 20" barrel and will feed through an SPC magazine. This is fairly new, there two firms offering 6BRX for AR15, BR Armament Technologies and AR Performance.
I like the AR Performance 6BRX bolt/BE system better than what BRAT offers (Olympic system).

AR308 is a different animal. I would probably want to launch 6.5's out of that beast.
_________________________
NO STEP ON SNEK

Top
Page 3 of 3 < 1 2 3

Moderator:  Bob, Jerry Garcia, ReiterRat, Sky-Guy 
Search

Site Links
Home
Our Washington Fishing
Our Alaska Fishing
Reports
Rates
Contact Us
About Us
Recipes
Photos / Videos
Visit us on Facebook
Today's Birthdays
Blotchy, Captain Crunch, joefowler8889
Recent Gallery Pix
hatchery steelhead
Hatchery Releases into the Pacific and Harvest
Who's Online
3 registered (stonefish, 28 Gage, 1 invisible), 570 Guests and 3 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
John Boob, Lawrence, I'm Still RichG, feyt, Freezeout
11498 Registered Users
Top Posters
Todd 27838
Dan S. 16958
Sol Duc 15727
The Moderator 13941
Salmo g. 13422
eyeFISH 12615
STRIKE ZONE 11969
Dogfish 10878
ParaLeaks 10363
Jerry Garcia 9013
Forum Stats
11498 Members
16 Forums
63822 Topics
646113 Posts

Max Online: 3937 @ 07/19/24 03:28 AM

Join the PP forums.

It's quick, easy, and always free!

Working for the fish and our future fishing opportunities:

The Wild Steelhead Coalition

The Photo & Video Gallery. Nearly 1200 images from our fishing trips! Tips, techniques, live weight calculator & more in the Fishing Resource Center. The time is now to get prime dates for 2018 Olympic Peninsula Winter Steelhead , don't miss out!.

| HOME | ALASKA FISHING | WASHINGTON FISHING | RIVER REPORTS | FORUMS | FISHING RESOURCE CENTER | CHARTER RATES | CONTACT US | WHAT ABOUT BOB? | PHOTO & VIDEO GALLERY | LEARN ABOUT THE FISH | RECIPES | SITE HELP & FAQ |