Originally Posted By: Dogfish
Roto hammer with a chisel bit? Set so it doesn't rotate, of course.

I thought about that and I have one...
Bosch Bulldog....gotta have the "switch" (spin, hammer/spin, hammer)
I was going to recommend it earlier, but it doesn't have enough stroke length for this job....works great on concrete though.
An air chisel has a longer stroke and would work much better for steel.

Quote:
Doesn't need to be prepped for the next guy, so bumps, etc. can remain. Just have to get the roof off.

1. Scissor lift
2. Peanut grinder + cutoff disks...cut around welds
3. Aforementioned "magic" Skil Saw blade from Home Depot...fast, general cutting


4. PPE + Fall Protection (FP not needed inside scissor lift)

Without seeing the job, the above gear is my best guess.

_________________________
NO STEP ON SNEK