Check

 

Defiance Boats!

LURECHARGE!

THE PP OUTDOOR FORUMS

Kast Gear!

Power Pro Shimano Reels G Loomis Rods

  Willie boats! Puffballs!

 

Three Rivers Marine

 

 
Page 1 of 2 1 2 >
Topic Options
Rate This Topic
#890532 - 03/30/14 10:02 PM Winter Shop Projects
Black Bart Offline
Returning Adult

Registered: 04/28/10
Posts: 319
Loc: Adna
Wet, cold, & rainy days are not always a such bad thing when you have a machine shop. Winter projects can be so much fun.

Allah be praised, this year I was able to save enough money thanks to the un-affordable health care act to finally buy a cheap 4x power scope and a second AR-15 lower receiver for the other 6.8 mm upper receiver I had laying around.

This year, the AR-15 rifle was the primary focus. A bunch of pre production produceability studies, mostly R&D stuff for future sound suppression endeavors and then of course some personal rifle work. That's the fun part. The stuff I make for me.

So, Sey Hallo to my lil" frenz.

For the ascot sportin' Tri-County liberals this project needed some other parts to complete the second rifle. A new lower receiver, lower parts kit, low mass hammer & trigger assy., and bolt carrier from JP Rifles, a new 6.8 enhanced bolt assy. from Lewis Machine & Tool and a few extras from MagPul is all that was needed.


Here is the shot of the new 4x scope mounted on the 22” upper receiver.





Some close ups of the 4x Trijicon ACOG Scope. It has an illuminated crosshair so in low light conditions, you look through it and you see the mil–dots and the cross hairs illuminated in red. It’s pretty freakin’ cool. The $75.00 Trijicon mount that I bought to fit the new 4x scope to the flat top receiver was a real POS so I ended up making my own.








Here is a comparison of the 22” rifle version with 4x Trijicon ACOG and the 16” carbine version with the EOTech holographic heads up sight.










I only have one thing to say ... Parker ... Stay the fukk off my lawn !


Edited by Black Bart (03/30/14 10:07 PM)
_________________________
Just lettin' it roll, lettin' the high times carry the low
Love livin' my life, easy come easy go

Top
#890552 - 03/30/14 11:11 PM Re: Winter Shop Projects [Re: Black Bart]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7914
Loc: Vancouver, WA
Very nice !

Judging from the images that have come back from the Stan and Iraq the ACOG is a favorite.

I have an Aimpoint that I need to try out soon.


Edit:
I'd make Paker do the "Hollywood Bullet Dance" if I caught him on my front yard.


smile
_________________________
NO STEP ON SNEK

Top
#890561 - 03/31/14 12:26 AM Re: Winter Shop Projects [Re: Direct-Drive]
Black Bart Offline
Returning Adult

Registered: 04/28/10
Posts: 319
Loc: Adna
Direct Drive... I somehow knew that you would like to see some gunz.

More photos to follow as the R&D studies progress.
_________________________
Just lettin' it roll, lettin' the high times carry the low
Love livin' my life, easy come easy go

Top
#890562 - 03/31/14 12:30 AM Re: Winter Shop Projects [Re: Black Bart]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7914
Loc: Vancouver, WA
I don't want to see any muscles....just old school guns.


grin
_________________________
NO STEP ON SNEK

Top
#890571 - 03/31/14 01:44 AM Re: Winter Shop Projects [Re: Direct-Drive]
Black Bart Offline
Returning Adult

Registered: 04/28/10
Posts: 319
Loc: Adna
Well, I have lots of photos from the silhouette target rifle daze if you are really interested.
_________________________
Just lettin' it roll, lettin' the high times carry the low
Love livin' my life, easy come easy go

Top
#890573 - 03/31/14 01:52 AM Re: Winter Shop Projects [Re: Black Bart]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7914
Loc: Vancouver, WA
Originally Posted By: Black Bart
Well, I have lots of photos from the silhouette target rifle daze if you are really interested.

Let's see 'em.
_________________________
NO STEP ON SNEK

Top
#890576 - 03/31/14 02:56 AM Re: Winter Shop Projects [Re: Direct-Drive]
Black Bart Offline
Returning Adult

Registered: 04/28/10
Posts: 319
Loc: Adna
Originally Posted By: Direct-Drive
Originally Posted By: Black Bart
Well, I have lots of photos from the silhouette target rifle daze if you are really interested.

Let's see 'em.


Really? Do you think that there are any other Elmer Fudd's up in here besides us two old shooters that have ever been to a sanctioned shooting match?
_________________________
Just lettin' it roll, lettin' the high times carry the low
Love livin' my life, easy come easy go

Top
#890580 - 03/31/14 08:12 AM Re: Winter Shop Projects [Re: Black Bart]
kingdog Offline
Juvenile at Sea

Registered: 05/28/13
Posts: 174
Loc: Tumwater
In want one of those custom gun vises!

Top
#890585 - 03/31/14 09:20 AM Re: Winter Shop Projects [Re: Black Bart]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7914
Loc: Vancouver, WA
Originally Posted By: Black Bart
Originally Posted By: Direct-Drive
Originally Posted By: Black Bart
Well, I have lots of photos from the silhouette target rifle daze if you are really interested.

Let's see 'em.


Really? Do you think that there are any other Elmer Fudd's up in here besides us two old shooters that have ever been to a sanctioned shooting match?

Hell yeah.
Your iron (and ultimate man cave) is appreciated by many here.
_________________________
NO STEP ON SNEK

Top
#890591 - 03/31/14 11:28 AM Re: Winter Shop Projects [Re: ]
Dogfish Offline
Poodle Smolt

Registered: 05/03/01
Posts: 10979
Loc: McCleary, WA
Nice work!

I had a muzzle break on my 6.8, but I took it off after standing next to my son's shooting one day. To the guys standing next to me in the last carbine class I took, sorry.

You have the right mags. Smoothest made for the 6.8, and those forends look very familiar.
_________________________
"Give me the anger, fish! Give me the anger!"

They call me POODLE SMOLT!

The Discover Pass is brought to you by your friends at the CCA.

Top
#890633 - 03/31/14 08:22 PM Re: Winter Shop Projects [Re: ]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7914
Loc: Vancouver, WA
Originally Posted By: 2MANY
HAMMERTIME.


rofl
_________________________
NO STEP ON SNEK

Top
#890656 - 04/01/14 12:19 AM Re: Winter Shop Projects [Re: Direct-Drive]
NickD90 Offline
Shooting Instructor for hire

Registered: 10/26/10
Posts: 6954
Loc: Snohomish, WA
Very solid BB and nice custom mount work. I'm really, really jealous that you have your own machine shop to tinker in...
_________________________
“If the military were fighting for our freedom, they would be storming Capitol Hill”. – FleaFlickr02

Top
#890730 - 04/01/14 08:43 PM Re: Winter Shop Projects [Re: NickD90]
Todd Offline
Bumpin the 6X9's

Registered: 03/08/99
Posts: 26548
Loc: Seattle, Washington USA
I've been in BB's shop and there's a helluva lot more there than is required for mere "tinkering"...dude is set up!

Fish on...

Todd

Top
#890732 - 04/01/14 08:59 PM Re: Winter Shop Projects [Re: Todd]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7914
Loc: Vancouver, WA
Aerospace Tinkering
It's a doctoral degree.
_________________________
NO STEP ON SNEK

Top
#890736 - 04/01/14 09:51 PM Re: Winter Shop Projects [Re: Todd]
Black Bart Offline
Returning Adult

Registered: 04/28/10
Posts: 319
Loc: Adna
I remember that day Todd. I was so nervous about our meeting that I was sweating like a whore in church. A very fat whore.

I was hoping you enjoyed some the canned produce I sent home with you but alas since the mason jars never got returned, well, I guess it is what it is. To bad. Lots of new canning & processing techniques going on here these daze.


Edited by Black Bart (04/01/14 10:27 PM)
_________________________
Just lettin' it roll, lettin' the high times carry the low
Love livin' my life, easy come easy go

Top
#890743 - 04/01/14 11:13 PM Re: Winter Shop Projects [Re: Black Bart]
Dogfish Offline
Poodle Smolt

Registered: 05/03/01
Posts: 10979
Loc: McCleary, WA
My winter projects.

5 coats of boiled linseed oil. Just need a few more coats of tung oil.


...and SB 5956.
http://www.governor.wa.gov/news/billaction/billActionNotice_20140402.pdf

Going to the signing tomorrow.
_________________________
"Give me the anger, fish! Give me the anger!"

They call me POODLE SMOLT!

The Discover Pass is brought to you by your friends at the CCA.

Top
#890747 - 04/01/14 11:35 PM Re: Winter Shop Projects [Re: Dogfish]
Direct-Drive Offline
ExtenZe Field Tester

Registered: 11/10/09
Posts: 7914
Loc: Vancouver, WA
Nice lookin' M1 DF !
_________________________
NO STEP ON SNEK

Top
#890759 - 04/02/14 12:29 AM Re: Winter Shop Projects [Re: Direct-Drive]
Dogfish Offline
Poodle Smolt

Registered: 05/03/01
Posts: 10979
Loc: McCleary, WA
HRA in unissued condition, 12/54. If it weren't for the stock it would qualify as a correct grade.
_________________________
"Give me the anger, fish! Give me the anger!"

They call me POODLE SMOLT!

The Discover Pass is brought to you by your friends at the CCA.

Top
#890763 - 04/02/14 12:47 AM Re: Winter Shop Projects [Re: Dogfish]
Black Bart Offline
Returning Adult

Registered: 04/28/10
Posts: 319
Loc: Adna
Wow... I never could get the wood finishing right. Direct D is right, nice looking M1.

Andy, thanx for all that you do for the firearms enthusiasts of this state.

Please show us more on the .30 cal slow speed rounds you have been working with. .223 case head ?
_________________________
Just lettin' it roll, lettin' the high times carry the low
Love livin' my life, easy come easy go

Top
#890768 - 04/02/14 02:08 AM Re: Winter Shop Projects [Re: Black Bart]
Dogfish Offline
Poodle Smolt

Registered: 05/03/01
Posts: 10979
Loc: McCleary, WA
I'll swing by your shop for an in person inspection of the M1. You will love it. Other than a few handling marks on the op rod charging handle, it is pristine.

It is easy to overthink wood finishing. Sanding a little is better than sanding a lot. Sanding by hand is better than using a power sander, especially on a rifle stock. Always sand with the grain, and when in doubt, use a finer grit paper.

The oil treatment is easy enough that I can figure it out, so I'm sure you would have no issue with it. Oil with boiled linseed oil until wet, let dry, oil again, and again, and again, and again. Finish the last two coats with tung oil, and go shooting.

8.0" .300 blackout barrel is on order, along with a few other parts so I can assemble my new SBR upper after my next stamp is approved.

Crappy picture, but from left to right are .223/5.56, 6.8 SPC, 7.62x39, and .300 Blackout.

The last cartridge is formed from a cut down .223 case. We made 1,000 for our initial set of brass. Here is what it sounds like, suppressed, using a friend's slide fire stock.

http://youtu.be/2mJ5i5sqNfI

They were supersonic rounds. Subs would have been much quieter.


_________________________
"Give me the anger, fish! Give me the anger!"

They call me POODLE SMOLT!

The Discover Pass is brought to you by your friends at the CCA.

Top
Page 1 of 2 1 2 >

Moderator:  Bob, Jerry Garcia, ReiterRat, Sky-Guy 
Search

Site Links
Home
Our Washington Fishing
Our Alaska Fishing
Reports
Rates
Contact Us
About Us
Recipes
Photos / Videos
Visit us on Facebook
Today's Birthdays
Castingpearls, jseattle, Norwester, Plug monkey
Recent Gallery Pix
Hatchery Releases into the Pacific and Harvest
Gibbs Delta Time Capsule
Who's Online
9 registered (War-Paint, Reefskunk, ondarvr, Illahee, DBS, snit, 3 invisible), 260 Guests and 3 Spiders online.
Key: Admin, Global Mod, Mod
Newest Members
Windwalker, RainaSBoyle, FishTacoma, Kirk M, Ragtimewilly
11465 Registered Users
Top Posters
Todd 26548
Dan S. 16478
Sol Duc 16137
elparquito 14087
Salmo g. 13004
eyeFISH 12563
STRIKE ZONE 12107
Dogfish 10979
ParaLeaks 10513
Jerry Garcia 9159
Forum Stats
11465 Members
18 Forums
76138 Topics
850659 Posts

Max Online: 3001 @ 01/28/20 02:48 PM

Join the PP forums.

It's quick, easy, and always free!

Working for the fish and our future fishing opportunities:

The Wild Steelhead Coalition

The Photo & Video Gallery. Nearly 1200 images from our fishing trips! Tips, techniques, live weight calculator & more in the Fishing Resource Center. The time is now to get prime dates for 2018 Olympic Peninsula Winter Steelhead , don't miss out!.

| HOME | ALASKA FISHING | WASHINGTON FISHING | RIVER REPORTS | FORUMS | FISHING RESOURCE CENTER | CHARTER RATES | CONTACT US | WHAT ABOUT BOB? | PHOTO & VIDEO GALLERY | LEARN ABOUT THE FISH | RECIPES | SITE HELP & FAQ |